ETP Chemicals

PRODUCTFEATURES           

MICROSAM-100-PLUS isa liquid grade colour removal compound

This Liquid form of MICROSAM-100-PLUSwill greatly simplifies handling,

dilution and feeding procedures. When used as recommended.MICROSAM-100-PLUS

completely absorbed by the flocculated solids.

APPLICATION BENEFITS

Good Colour Removal Efficiency

Much less sludge compared to LIME AND FE SULPHATE GoodClarity, reduced turbidity, Better RO efficiency, Reduction in power cost.

DOSAGE: 5% STOCK SOLUTION TO BE PREPARED

This is then dosed into the raw effluent for optimalresults.

SPECIFICATION          

Appearance     4Clearto light yellowliquid

PH of0.2%       45to 6 solution in distilledwater

Solubility          4Completelysoluble inwater

ShelfLife           46months

MICROSAM-100-PLUS isavailable in liquid in 50Kg./200Kg. H.D.P.E.Drums.

Disclaimer: The above information iscorrect to the best of our knowledge, however the recommendations are withoutengagement on our part as they depend upon the conditions which vary from plantto plant.

Product Features:

SETIFLOC-PLUS is a HIGH molecular weight ANIONICflocculant in granulated powder form. This product is designed to enhanceliquid/solid separation in a wide variety of industrial applications like

Clarification, Settling, Thickening, Concentrating,Dewatering, Floatation, Filteration

 

Dosage: 0.1%solution to be prepared and dosed to the effluent. Rapid Settling is observedand minimising turbiditybyencapsulating suslended flocsefficiently.

ApplicationBenefits:

Superior floc formation; Major effects yielded withlimited use; Faster settling rate & clarification;Use over a broad pH; Superior filteration & dewatering;Combined use with organic coagulant or cross treatment with cationic polymergives superior treatment effects; Removal of suspended solids, BOD, COD andphosphate in waste water treatmentplant

 

Disclaimer: Theabove information is correct to the best of our knowledge, however therecommendations are without engagement on our part as they depend upon theconditions which vary from plant to plant.

PRODUCTFEATURES              

MICROSAM-PLUS isa liquid grade colour removal compound

This Liquid form of MICROSAM-PLUSwill greatly simplifies handling,

dilution and feeding procedures. When used as recommended.MICROSAM-PLUS

completely absorbed by the flocculated solids andclarified water will contain none of polymer.

APPLICATION BENEFITS

Good Colour Removal Efficiency

Much less sludge compared to LIME AND FE SULPHATE GoodClarity, reduced turbidity, Better RO efficiency, Reduction in power cost.

DOSAGE: 5% STOCK SOLUTION TO BE PREPARED

This is then dosed into the raw effluent for optimalresults.

SPECIFICATION          

Appearance     4Clearto light yellowliquid

PH of0.2%       45to 6 solution in distilledwater

Solubility          4Completelysoluble inwater

ShelfLife           46months

MICROSAM-PLUS  is available in liquid in 50Kg./200Kg.          H.D.P.E.Drums.

PRODUCTFEATURES  

MICROSAM-100-PLUS isa liquid grade colour removal compound

This Liquid form of MICROSAM-100-PLUSwill greatly simplifies handling,

dilution and feeding procedures. When used as recommended.MICROSAM-100-PLUS

completely absorbed by the flocculated solids.

APPLICATION BENEFITS

Good Colour Removal Efficiency

Much less sludge compared to LIME AND FE SULPHATE GoodClarity, reduced turbidity, Better RO efficiency, Reduction in power cost.

DOSAGE: 5% STOCK SOLUTION TO BE PREPARED

This is then dosed into the raw effluent for optimalresults.

SPECIFICATION              

Appearance     4Clearto light yellowliquid

PH of0.2%       45to 6 solution in distilledwater

Solubility          4Completelysoluble inwater

ShelfLife           46months

MICROSAM-100-PLUS isavailable in liquid in 50Kg./200Kg. H.D.P.E.Drums.

Disclaimer: The above information is correct to the bestof our knowledge, however the recommendations are without engagement on ourpart as they depend upon the conditions which vary from plant to plant.

MICROSAM-9010 is a liquid grade colour removal compound

This Liquid form of MICROSAM-9010 will greatly simplifieshandling,

dilution and feeding procedures. When used as recommended.MICROSAM-9010

completely absorbed by the flocculated solids.

APPLICATION BENEFITS

Good Colour Removal Efficiency

Much less sludge compared to LIME AND FE SULPHATE GoodClarity, reduced turbidity, Better RO efficiency, Reduction in power cost.

DOSAGE: 5% STOCK SOLUTION TO BE PREPARED

This is then dosed into the raw effluent for optimalresults.

SPECIFICATION              

Appearance        Clearto light yellow liquid

PH of 1.0 %         5 to 6 solution in distilled water

Solubility             Completely soluble in water

Shelf Life             6 months

MICROSAM-9010  isavailable in liquid in 50 Kg./200 Kg.              H.D.P.E.Drums.

Disclaimer: The above information is correct to the bestof our knowledge, however the recommendations are without engagement on ourpart as they depend upon the conditions which vary from plant to plant.

Product Features:

SETIFLOC-PLUS is a HIGH molecular weight ANIONICflocculant in granulated powder form. This product is designed to enhanceliquid/solid separation in a wide variety of industrial applications like

Clarification, Settling, Thickening, Concentrating,Dewatering, Floatation, Filteration

Dosage: 0.1% solution to be prepared and dosed to theeffluent. Rapid Settling is observed and minimising turbidityby encapsulating suslended flocsefficiently.

ApplicationBenefits:

Superior floc formation; Major effects yielded withlimited use; Faster settling rate & clarification;Use over a broad pH; Superior filteration & dewatering;Combined use with organic coagulant or cross treatment with cationic polymergives superior treatment effects; Removal of suspended solids, BOD, COD andphosphate in waste water treatmentplant

Disclaimer: Theabove information is correct to the best of our knowledge, however therecommendations are without engagement on our part as they depend upon theconditions which vary from plant to plant.

Product Features:

SETIFLOC-PLUS is a HIGH molecular weight ANIONIC flocculantin granulated powder form. This product is designed to enhance liquid/solidseparation in a wide variety of industrial applications like

Clarification, Settling, Thickening, Concentrating,Dewatering, Floatation, Filteration

Dosage: 0.1%solution to be prepared and dosed to the effluent. Rapid Settling is observedand minimising turbiditybyencapsulating suslended flocsefficiently.

ApplicationBenefits:

Superior floc formation; Major effects yielded withlimited use; Faster settling rate & clarification; Use over a broad pH;Superior filteration & dewatering; Combined use with organic coagulant orcross treatment with cationic polymer gives superior treatment effects; Removalof suspended solids, BOD, COD and phosphate in waste water treatment plant

Disclaimer: Theabove information is correct to the best of our knowledge, however therecommendations are without engagement on our part as they depend upon theconditions which vary from plant to plant.

PRODUCT FEATURES:-
PAC is a liquid grade inorganic colour removal compound This Liquid form of PAC will greatly simplifies handling,dilution and feeding procedures. When used as recommended.PAC completely absorbed by the flocculated solids and clarified water will contain none of polymer.

APPLICATION BENEFITS :-
Good Colour Removal Efficiency along with other colour removal compounds OR in light shades good by itself.Much less sludge compared to LIME AND FE SULPHATE Good Clarity, reduced turbidity, Better RO efficiency,

DOSAGE: Based on acidity or alkalinity of effluent and intensity of colour This is then dosed into the raw effluent for optimal results.

SPECIFICATION:-
Appearance :- Clear to light yellow liquid
PH of 0.2 % :- approx 2 in distilled water
Solubility :- Completely soluble in water
Shelf Life :- 6 months
PAC is available in liquid in 50 Kg./200 Kg. H.D.P.E. Drums.

Disclaimer:

The above information is correct to the best of our knowledge, however the recommendations are without engagement on our part as they depend upon the conditions which vary from plant to plant.

Product Features:

SETIFLOC-PLUS is a HIGH molecular weight ANIONIC flocculantin granulated powder form. This product is designed to enhance liquid/solidseparation in a wide variety of industrial applications like

Clarification, Settling, Thickening, Concentrating,Dewatering, Floatation, Filteration

Dosage: 0.1%solution to be prepared and dosed to the effluent. Rapid Settling is observedand minimising turbiditybyencapsulating suslended flocsefficiently.

ApplicationBenefits:

Superior floc formation; Major effects yielded withlimited use; Faster settling rate & clarification; Use over a broad pH;Superior filteration & dewatering; Combined use with organic coagulant orcross treatment with cationic polymer gives superior treatment effects; Removalof suspended solids, BOD, COD and phosphate in waste water treatment plant

Disclaimer: Theabove information is correct to the best of our knowledge, however therecommendations are without engagement on our part as they depend upon theconditions which vary from plant to plant.

Polyaluminium Chloride Solution (PAC)

PRODUCT FEATURES

PAC is a liquid grade inorganic colour removal compound. This Liquid form of PAC will greatly simplifies handling, dilution and feeding procedures. When used as recommended. PAC completely absorbed by the flocculated solids and clarified water will contain none of polymer.

APPLICATION BENEFITS

SPECIFICATION

PAC is available in liquid in 50 Kg./200 Kg. H.D.P.E. Drums.

Disclaimer: The above information is correct to the best of our knowledge, however the recommendations are without engagement on our part as they depend upon the conditions which vary from plant to plant.

Description:

Setifloc-plus to is an elevated sub-atomic weight of ANIONIC flocculant in fine powder state. This is intended to improve solid or fluid partition in a broad assortment of modern applications such as filteration, floatation, dewatering, concentrating, thickening, settling, clarification and more.

Measurements: 0.1% concentration to be arranged as well as dosed to the wastewater. Quick Settling is noticed and limiting turbidity by typifying suslended flocs proficiently.

Application Advantages:

Disclaimer: The above information is correct to the best of our knowledge, however the recommendations are without engagement on our part as they depend upon the conditions which vary from plant to plant.