Chemicals used in ETP

MICROSAM-9010 is a liquid grade colour removal compound

This Liquid form of MICROSAM-9010 will greatly simplifieshandling,

dilution and feeding procedures. When used as recommended.MICROSAM-9010

completely absorbed by the flocculated solids.

 

APPLICATION BENEFITS

Good Colour Removal Efficiency

Much less sludge compared to LIME AND FE SULPHATE GoodClarity, reduced turbidity, Better RO efficiency, Reduction in power cost.

 

DOSAGE: 5% STOCK SOLUTION TO BE PREPARED

This is then dosed into the raw effluent for optimalresults.

 

SPECIFICATION              

Appearance         Clearto light yellow liquid

PH of 1.0 %         5 to 6 solution in distilled water

Solubility             Completely soluble in water

Shelf Life             6 months

MICROSAM-9010  isavailable in liquid in 50 Kg./200 Kg.              H.D.P.E.Drums.

 

Disclaimer: The above information is correct to the bestof our knowledge, however the recommendations are without engagement on ourpart as they depend upon the conditions which vary from plant to plant.